2-channel relay Shelly Qubino Wave 2PM

Short description

The Wave 2PM (device) is a single product that allows you to remotely control two electrical devices, such as light bulbs, ceiling fans, and infrared heaters. It turns on (turns on/off) two independent loads and measures their power consumption individually and collectively. The device is compatible with switches (by default) and buttons.

The switch is connected to the input terminal SW (SW1)

If SW (SW1) is configured as a switch (by default), each toggle of the switch will change the output state O (O1) to the opposite state - on, off, on, etc.

• Change the switch position once: Change the output state O (O1) to the opposite and send a command to the associated devices of groups 2 and 3 (see section "Z-Wave association")

• Toggle switch twice: If the delay between the first and second press is less than 500 ms, it is interpreted as a double toggle. Send the command to the associated devices (regulators, blinds,….) in the associated groups 2 and 3 (see section Z-Wave association )

The switch is connected to input terminal SW2

If SW (SW1) is configured as a switch (by default), each toggle of the switch will change the output state O2 to the opposite state - on, off, on, etc.

• When changing the switch position once: Change the output state O2 to the opposite state and send a command to the associated devices of groups 2 and 3 (see the "Z-Wave association" section)

• Toggle switch twice: If the delay between the first and second press is less than 500 ms, it is interpreted as a double toggle. Send the command to the associated devices (regulators, blinds,….) in the associated groups 2 and 3 (see section Z-Wave association )